VACSTAR lite Advanced Plus Solution Vacuum pump
40 546 SEK
- Betala säkert mot faktura
- Möjlighet att få offert per e-post
- Maila oss, vi svarar snabbt!
Beskrivning
Art.nr: 0010014499
VACSTAR lite Advanced Plus Solution Vacuum pump
The VACSTAR lite Advanced Plus Solution package is a modern, user and environmentally friendly solution for your vacuum applications in the laboratory. By combining the VC 10 pro vacuum controller with the VACSTAR lite vacuum pump, automatic boiling point detection is available via the integrated solvent library. The desired setpoint can also be conveniently set manually via the large, easy-to-read TFT display. In addition, the program mode enables the simple programming of several ramp steps in order to efficiently control complex simulations. The VSE 1 emission condenser prevents solvents from being released into the room air, thus protecting users and the environment.Perfectly suited for a variety of classic laboratory applications, including separation, filtration and drying processes. Ideal for use in conjunction with rotary evaporators, reactors, tempering chambers, centrifuges and other laboratory equipment.
Advantages and technical features:
- Automatic boiling point detection: Automatically determines and maintains the boiling point of your solvent using the integrated solvent library with pre-configured parameters for common solvents.
- Integrated device communication: The vacuum controller seamlessly synchronizes with circulators, resulting in optimized lab operations and increased overall performance.
- Longer life cycle: An integrated valve cleaning function removes residual solvent, extending system life and reducing maintenance.
- USB/RS232 interfaces: These allow connection to labworldsoft® laboratory software for advanced process control.
- Increased safety: The VSE 1 emission condenser ensures increased user safety by preventing solvent residues from entering the room air.
Scope of delivery
- VACSTAR lite
- VC 10 pro
- VSE 1
- VC 10.600 Stand pole
Technical Data
| Pump rate max. (50/60Hz) | 1 m³/h |
| Pump rate max. (50/60Hz) | 16.67 l/min |
| Final pressure | 9 mbar |
| Suction levels | 2 |
| Cylinder | 2 |
| Connection diameter suction side | 8 mm |
| Connection diameter pressure side | 8 mm |
| Input pressure | 10 - 1030 mbar |
| Boiling point detection | yes |
| Solvent library | yes |
| Two-point control | yes |
| Analog speed vacuum control | yes |
| Speed range | 285 - 1100 rpm |
| Speed (50Hz) | 1100 rpm |
| Speed (60Hz) | 1100 rpm |
| Nominal speed | 1100 rpm |
| Display | TFT |
| Pressure unit / scale | mbar, hPa, mmHg, Torr |
| Vacuum sensor | yes |
| Vacuum sensor type | ceramic Al2O3 |
| Pressure max. for pressure sensor | 1.6 bar |
| Measurement range (absolute) | 1 - 1100 mbar |
| Control range | 1 - 1100 mbar |
| Resolution pressure | 1 mbar |
| Measurement uncertainty | 1 mbar |
| Medium temperature (gas) | 5 - 40 °C |
| Vacuum valve | yes |
| Venting valve | yes |
| Emission condenser | yes |
| Connection for ext. temperature sensor | PT1000 |
| Temperature unit | °C / °F |
| Temperature measuring range | -10 - 200 °C |
| Temperature measurement resolution | 1 K |
| Accuracy of temperature measurement | ±1 K |
| Timer | yes |
| Time setting min. | 1 s |
| Time setting max. | 6000 min |
| Noise at low. pressure | 54 dB(A) |
| Material in contact with medium | PTFE, FFPM, PPS, NBR |
| Housing material | alu-cast coating / thermoplastic polymer |
| Mode automatic | yes |
| Mode manual | yes |
| Mode pump % | yes |
| Mode program | yes |
| Graph function | yes |
| Chiller control | yes |
| Vacuum leakage test | yes |
| Dimensions (W x H x D) | 260 x 502 x 377 mm |
| Weight | 11.2 kg |
| Permissible ambient temperature | 5 - 40 °C |
| Permissible relative humidity | 80% (up to 31°C), decreasing linearly to max. 50 (@40°C) |
| Protection class according to DIN EN 60529 | IP 20 |
| RS 232 interface | yes |
| USB interface | USB-C |
| Analog output | yes |
| Analog input | yes |
| Voltage | 100 - 240 V |
| Frequency | 50/60 Hz |
| Power input | 144 W |
| Power input standby | 3.5 W |
| Fuse | 2x T4A 250V |
Filer och media
 | Bifogad fil |